Dr. Gaurav Bartarya Assistant Professor
School of Mechanical Sciences

Research Interests

Conventional Machining of hard material, Modeling and simulation of Machining processes, Computer Aided Manufacturing, Reverse Engineering, Incremental forming, Microfabrication

Brief Resume

Contact Details

  • #309, School of Mechanical Sciences
  • 674-713-7114
  • bartarya@iitbbs.ac.in

Other Profile Link(s)

Education

 Degree Discipline Year School
  B.Tech. Production Engineering 2000 G.B.Pant University of Agric. and Tech., Pantnagar
  M.Tech. Manufacturing Science 2002 IIT Kanpur
  Ph.D. Mechanical Engg. 2014 IIT Kanpur
 

Biosketch

 

Teaching

UG courses: 1. Computer Aided Design and Manufacturing (Final year Mechanical Engg.) 2. Operations Management (Final year Mechanical Engg.) 3. Industrial Engineering and Management ( 3rd year Lateral course) 4. Introduction to Mechanical Engineering (2nd year Lateral course) 5. Introduction to CAD/CAM (2nd year Lateral course) 6. Introduction to Manufacturing Processes (1st year lab course) 7. Casting, Welding Forming Lab (3rd year lab) PG courses: 1. Digital Manufacturing (M.Tech. Manufacturing Engineering) 2. Machining Science (M.Tech. Manufacturing Engineering) 3. Manufacturing Simulation Lab (M.Tech. Manufacturing Engineering) 4. Mechanical System Simulation lab-II (M.Tech. MSD)

Projects

Sponsoring

Agency

Title of project

Role

Amount of

grant/Status

Grant year

Co-investigators

 

DST SERB

Titanium alloy based fine featured Cranial implant development using Incremental Forming and ECM (CRG/2021/003348)

PI

33,71,764 lacs approx.

28.12.2021-27.12.2024

Dr. Suvradip Mullick

Dr. Srikant Gollapudi

Dr. Chetan

 

Ministry of Mines

Employing metallurgical silicon to develop new class of silicon composites for structural applications

Co-PI

37.997 Lakhs

2020-23

PI: Dr. Srikant Gollapudi (SMMME)

DST SERB

Ultrasonic assisted laser additive manufacturing of nickel based super alloys and its online temperature monitoring to control the directionality in grain growth, anisotropy in mechanical properties and elemental segregation; and enhancing the component life by laser shock peening

Co-PI

29.92 lakhs

2020-2023

PI: Dr. Suvradip Mullick

Other Co PIs:

Dr. Srikant Gollapudi

Dr. Gopinath (IITH)

IITBBS-Seed project

Development of Vibration Assisted Machining setup to address surface integrity issues on hard turned parts

PI

10.00 lacs

 

2019-21

 

--

Recent Publications (International Journals)

1Namit Singh Bhadoria, Gaurav Bartarya, "On the improvement in process performance of Ceramic Inserts during Hard Turning in MQL Environment", Materials and Manufacturing Processes, online: August 2021 (Taylor and Francis) https://doi.org/10.1080/10426914.2021.1967978
2Pranesh Dutta, Gaurav Bartarya, “On the improvement of process performance of hard turning using vibration assisted machining”, Journal of Micro-Manufacturing, Online April 2021, DOI: 10.1177/25165984211008059
3Rupak Kumar Nayak, Gaurav Bartarya, Manas Ranjan Sahoo, “A Numerical Analysis of the Effect of Tool Wear on Surface Integrity during Hard Turning” Journal of Mechanical Science and Technology, 35(3) 2021, pp.1215-1222, Springer Pub. DOI 10.1007/s12206-021-0235-7
4Gaurav Bartarya, S.K.Choudhury, ‘Effect of Tool Wear on White Layer Thickness and Subsurface Hardness on Hard Turned EN31 Steel’, Int. J. of Machining and Machinability of Materials. Vol. 18, Nos. 5/6, 2016. pp 483-500
5Gaurav Bartarya, S.K.Choudhury, “Influence of Machining Parameters on Forces and Surface Roughness during Finish Hard Turning of EN 31 steel”, Proc. of IMechE Part B, Journal of Engineering Manufacture, Sage Publishers.U.K., Sep 2014, Vol. 228, pp 1068-1080, DOI: 10.1177/0954405413500492
6Gaurav Bartarya, S.K.Choudhury, “State of the Art in Hard Turning”, Int. J. of Machine tools and Manufacture, Vol. 53, Issue 1, 2012 pp. 01-14. DOI:10.1016/j.ijmachtools.2011.08.019
7Gaurav Bartarya, S.K.Choudhury, “A methodology to estimate the forces on the tool insert in finish hard turning”, Int. J. of Machining and Machinability of Materials, Vol. 11, No. 3, 2012, pp. 280-296. http://dx.doi.org/10.1504/IJMMM.2012.046887
8Gaurav Bartarya, S.K.Choudhury, “Effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel”, Procedia CIRP, Vol. 1, 2012, pp. 674-679, http://dx.doi.org/ 10.1016/j.procir.2012.04.116
9Gaurav Bartarya, S.K.Choudhury, “A regression model for force and surface roughness estimation during hard turning”, Advanced Materials Research, Vols.299-300, 2011, pp 1167-1170. doi:10.4028/www.scientific.net/AMR.299-300.1167
10S.K.Choudhury, G.Bartarya, “Role of temperature and Surface finish in predicting tool wear using Neural Network and Design of Experiment”, Int. J. of Machine tool and Manufacture, Vol.43, Issue7, 2003, pp. 747-753. DOI:10.1016/S0890-6955(02)00166-9
11Gaurav Bartarya, Himanshu Varma, Pallavi Asthana, Rashmi Kumari, “Role of flank wear in analyzing thermal aspect of orthogonal cutting”, International Journal of Applied Engineering Research, Vol. 6 No. 4, 2011, pp. 511-522. ISSN 0973-9769
12Gaurav Bartarya, Aman Sinha, “Prediction of Surface Finish and Flank Wear using Neural Network”, MIT International Journal of Mechanical Engineering, Vol.1, No. 1, 2011, pp 61-66. ISSN 2230-7699

Conferences (International)

1Pranesh Datta, Gaurav Bartarya, “A Comprehensive 3D FEM Model To Study Forces, Cutting Temperature And Residual Stresses During Vibration Assisted Hard Turning Considering Tool Cooling Cycle” ASME International Mechanical Engineering Congress and Exposition (IMECE2021), Virtual conference, Online, November 1-5, 2021, https://doi.org/10.1115/IMECE2021-70907
2Ravi Shankar, Parag Sakate Malhari, Gaurav Bartarya, Suvradip Mullick, “Development and Analysis of Electro-Jet Milling For Macro to Micro-Machining In Thin Metal Sheet”, Proc. of 11th Intl. Conf. on Precision, Meso, Micro and Nano Engineering, Dec. 12-14, 2019, IIT Indore [paper id 1563614870]
3Pranesh Dutta, Gaurav Bartarya, “A finite element analysis of residual stress in Vibration Assisted Machining of AISI 52100 Steel at different frequencies” , Proc. of 11th Intl. Conf. on Precision, Meso, Micro and Nano Engineering, Dec. 12-14, 2019, IIT Indore [paper id 1565868234]
4Gaurav Bartarya, Rupak Kumar Nayak, Manas Ranjan Sahoo, “Prediction of White Layer through Thermal Modeling of Finish Hard Turning of EN31 steel”, Proc. of 11th Intl. Conf. on Precision, Meso, Micro and Nano Engineering, Dec. 12-14, 2019, IIT Indore [paper id 1563711678(I)]
5Gaurav Bartarya, Manas Ranjen Sahoo, Suvradip Mullick, Rupak Kumar Nayak, “Effect of Laser Preheating on Residual Stresses during Hard Turning of En31 Steel”, Proc. of 11th Intl. Conf. on Precision, Meso, Micro and Nano Engineering, Dec. 12-14, 2019, IIT Indore (paper id 1563711678)
6Gaurav Tyagi , J. Bhaskar, S. K. Singhal and G. Bartarya, “Experimental Study on Machining of EN24 Using Minimum Quantity Lubrication”, Advances in Forming, Machining and Automation: Proceedings of AIMTDR 2018 Springer Pub, Dec.13-15, 2018, Anna University, Chennai. Chapter 44 , pp. 527-538.
7Jitendra Kumar Verma, Gaurav Bartarya, Jitendra Bhaskar, “Effect of Minimum Quantity Lubrication on Tool Wear and Surface Integrity during Hard Turning of EM31 steel” Advances in Forming, Machining and Automation: Proceedings of AIMTDR 2018, Springer Pub, Dec.13-15, 2018, Anna University, Chennai, Chapter 16 , pp 205-218
8Gaurav Bartarya, Ankit, Indrajeet Yadav, Manish Kumar Yadav, Vishal Kumar, “An Experimental Analysis of High Speed Turning of Al 7075 using Cemented Carbide Tool for Process Optimisation”, Proc. of 10th Intl. Conf. on Precision, Meso, Micro and Nano Engineering, Dec. 7-9, 2017, IIT Madras, Chennai, pp 778-781. ISBN: 978-93-80689-28-9
9Gaurav Bratarya, S.K.Choudhury, “Modeling of Cutting Forces considering Chip-Tool Interaction and Flank Wear in Finish Hard Turning” 2nd CIRP Intl. conf. on Process Machine Interactions, June 10-11, 2010, Univ. of British Columbia, Vancouver, CANADA.
10Gaurav Bartarya, S.K.Choudhury, “Modeling the forces in finish hard turning considering tool flank wear”, Proc. of 3rd Intl. and 24th National AIMTDR Conf., Dec.13-15, 2010, Andhra University College of Engineering (A), Visakhapatnam, pp81-86
11Gaurav Bartarya, Himanshu Varma, Pallavi Asthana, Rashmi Kumari, “Role of flank wear in analyzing thermal aspect of orthogonal cutting”, Proc. of Int. Conf. on Emerging Trends in Mech. Engg, Feb.24-26, 2011, Thapar Univ., Patiala, India (paper # MF205)
12Gaurav Bartarya, Kunal Saurabh, “Finite Element Modeling of Stress Distribution in Honed Edge Tool during Hard Turning”, Proc. of the 5th Intl. Conf. on Advances in Mechanical Engineering (ICAME-2011), June 06-08, 2011, S.V.N.I.T., Surat, India, pp 621-625.
13Gaurav Bartarya, S.K.Choudhury, “A regression model for force and surface roughness estimation during hard turning”, Int. Conf. on Materials and Manufacturing, Liaoning Univ. of Technology Liaoning Jinzhou, China, Sep. 7-9, 2011(#D080).
14Gaurav Bartarya, S.K.Choudhury, “Effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel”, Paper no. 157, 5th CIRP Conf. on High Performance Cutting, 4-7 June, 2012,ETH Zurich. Switzerland.
15Kunal Saurabh, Gaurav Bartarya, “Finite element modeling of stress distribution in PCBN tool during hard turning”, Proc. of Intl. Conf. on Material Processing and Characterization, March 8-10, 2012, Hyderabad, India.
16Gaurav Bartarya, S.K.Choudhury, “Influence of machining parameters on forces and surface roughness during finish hard turning AISI 52100 grade steel”, Proc. of 4rd Intl. and 25th National AIMTDR conf., Dec.14-16, 2012, Jadavpur Univ., Kolkata pp.293-298
17G.Bartarya, K.C.Sadhukhan, S.B.Yadaw, “Comparative Analysis of Surfaces Produced during Machining of Various Fiber Reinforce Plastic Composites”, Proc. of 4rd Intl. and 25th National AIMTDR conf., Dec.14-16, 2012, Jadavpur Univ., Kolkata pp.193-198
18G.Bartarya, V.K.Tiwari, J.Ramkumar, “Effect of AWJM Process Parameters on Form accuracy and Taper during Machining Kevlar Epoxy Composite”, Proc. of 4rd Intl. and 25th National AIMTDR conf., Dec.14-16, 2012, Jadavpur Univ., Kolkata pp.525-530
19G. Bartarya, Monika Srivastava, “Surface Modelling and Tool Path Generation for CAD/CAM Applications”, 3rd International Conference on Production and Industrial Engineering CPIE-2013, March, 30-31, 2013, NIT Jalandhar, pp 189-191
20G. Bartarya, S.K.Choudhury, “Finite Element Analysis of Residual Stresses in Hard turning of AISI 52100 Steel using Worn-out CBN Tools”, Proceedings of 2nd Int. Conf. IRAM 2013, Dec. 16-18, 2013, IIT Indore, pp. 471-477.
21G. Bartarya, S.K.Choudhury, “Effect of Tool Wear on White Layer Thickness and Subsurface Hardness on Hard Turned EN31 Steel”, Proc. of 5th Intl. and 26th National AIMTDR conf., Dec.12-14, 2014, IIT Guwahati, pp.854-1 to 854-6
22G. Bartarya, G. Kumar, J. Ramkumar, “An Experimental Study of Forces and Strain in Single Point Sheet Incremental Forming of Aluminum”, Proc. of 9th Intl. Conf. on Conference on Precision, Meso, Micro and Nano Engineering, Dec. 10-12, 2015, IIT Bombay. (Submission no.126)
23Rajneesh Sagar, G.Bartarya, A.K. Singh, “On the Performance of Dyneema HB 80 Fiber Reinforced Polymer Composite: Effect of Curing Temperature”, Proc. of Int. Conf. on Advanced and Agile Manufacturing Systems, Dec 28-29, 2015 KNIT, Sultanpur, pp 244-248
24Vishal Saxena, Gaurav Bartarya, “Tool Path Generation for a Free form Surface Generated using Bezier Surface Patches for Reverse Engineering”, International Conference on Innovations and Developments in Mechanical Engineering (IDME’17), KNIT Sultanpur, March 25-27, 2017,pp 105-109.
25Gaurav Bartarya, S.K.Choudhury, “A Finite Residual Element Stress Analysis of Vibration Assisted Hard Turning of AISI, 52100 Steel”, Proc. of Intl. Conf. on Design Materials and Manufacturing concerns in production of quality Engineering goods, March 27-29,2017, HBTU Kanpur, pp 37-43.
26Arpit Srivastava and Gaurav Bartarya, "A Review on Issues in Machining of Nickel Based Alloys", Proc.of Intl. Conf. on Design Materials and Manufacturing concerns in production of quality Engineering goods, March 27-29,2017, HBTU Kanpur, pp 368-374.
27Jitendra Kumar Verma and Gaurav Bartarya, “A Review of Machining of Steels in Minimum Quantity Lubrication Conditions”, Proc. of Intl. Conf. on Design Materials and Manufacturing concerns in production of quality Engineering goods, March 27-29,2017, HBTU Kanpur, pp 404-410.
28Namit Singh Bhadauria, Gaurav Bartarya, “Finish Hard Turning of EN31 Steel Using Minimum Quantity Lubrication: Surface Integrity Analysis”, Int. Conf. on Technological and Managerial strategies for next generation transformation, Mangalmay Group of Institutions, Greater Noida, ISBN: 978-93-86432-66-7

Conferences (National)

1Ajai Singh Rana, Gaurav Bartarya, “Operation sequencing for rotational components using genetic algorithm”, Proc. of National Conf. on recent development in mechanical Engineering Oct 31- Nov.1, 2003., TIET, Patiala, pp-417-423
2Sunil Luthra, Gaurav Bartarya, B.L.Sethi “Optimal selection of machining parameters for multi-pass turning”, Proc. of National Conf. on recent development in mechanical Engineering Oct 31- Nov.1, 2003, TIET, Patiala, pp-459-465
3Livharleen Kaur Sandhu, Gaurav Bartarya, Aman Sinha, “Optimized gripper sequencing for robotic assembly using Genetic Algorithm”, Proc. of A conf. on Computer Aided Design and Manufacturing: A Global Perspective. April 8-9, 2005, TIET, Patiala Paper reference no. CCADM 126 (Conference CD)
4Ajit Pal Singh, Gaurav Bartarya, “A work-centre initiated dispatching algorithm for AGVs using the bidding concept” Proc. of A conf. on Computer Aided Design and Manufacturing: A Global Perspective. April 8-9, 2005, TIET, Patiala, Paper reference no. CCADM 138 (Conference CD)
5Gurpreet Singh, Gaurav Bartarya, “Operation sequencing and machine parameter selection for rotational components using genetic algorithm and expert system”, Proc. of 2nd National Conf. on Recent Developments in Mechanical Engineering, Nov. 10-11, 2006,TIET Patiala, pp 218-227
6Shalu Thakur, Gaurav Bartarya, , Sandeep Sharma “Solving job shop scheduling problem using constraint logic programming”, Proc. of 2nd National Conf. on Recent Developments in Mechanical Engineering, Nov. 10-11, 2006, TIET Patiala, pp 228-237.
7Gaurav Bartarya, Aman Sinha,“Prediction of Surface Finish and Flank Wear using Neural Network”, Proc. of the National Conf. on Advances in Mechanical Engineering”(NCAME 2009), Moradabad Institute of Technology, Moradabad, Feb. 28 and March1, 2009, pp 446-455.
8Gaurav Bartarya, V.K.Jadon, Gagnesh Sharma, “A Finite Element Thermal Analysis of Carbide Insert for Flank Wear Monitoring during Turning”, Proc. of the National Conf. on Emerging Trends in Mechanical Engineering”(ETME 2009), MMMEC, Gorakhpur, Oct. 12-13, 2009, pp 85-93
9Gaurav Bartarya, Kunal Saurabh, “Finite element analysis of hard turning by using ANSYS/Implicit”, Proc. of National conf. on Emerging trends in Mechanical Engineering (ETME 2011) IIMT, Greater Noida., April 7-8, 2011, pp 38-41.
10V.K.Tiwari, Gaurav Bartarya, J Ramkumar, “Effect of Cutting Parameters on feature accuracy during Machining Kevlar Epoxy Composite using AWJM” Proc. of IE National seminar on Advances in materials and material selection in design, IE Kanpur Chapter, Aug. 24-25, 2012, pp. 69-80
11Arpit Srivastava, Gaurav Bartarya, “Thermal Analysis of Machining of Nickel Based Superalloy”, Proceedings of the National conference on Emerging trends in Mechanical Engineering, HBTI Kanpur, Feb 15-16, 2014 pp.79-86
12Susheel Kumar, Gaurav Bartarya, “A Review on Machining of Al/SiCp-Metal Matrix Composites”, Proceedings of the National conference on Emerging trends in Mechanical Engineering, HBTI Kanpur, Feb 15-16, 2014 pp.71-78
13Govind Kaishoreaya, Gaurav Bartarya, “An Analytical Modelling of Forces During Drilling of Kevlar Epoxy Composite “, Proceedings of the National conference on Emerging trends in Mechanical Engineering, HBTI Kanpur, Feb 15-16, 2014 pp. 87-94
14Vishal Saxena, Gaurav Bartarya, “Free Form Surface Modeling for Reverse Engineering”, Proceedings of the National conference on Emerging trends in Mechanical Engineering, HBTI Kanpur, Feb 15-16, 2014, pp. 165-170
15Vishal Saxena, Gaurav Bartarya, “Modeling of Free Form Surfaces using Bezier Surface Patch for Reverse Engineering”, Proceedings of National Conference on Innovations in Materials, Design and Manufacturing, MED, HBTI Kanpur, March 27-28, 2015, pp. 280-285
16Arpit Srivastava, Gaurav Bartarya, “Thermal Aspects in Machining of Superalloy”, Proceedings of National Conference on Innovations in Materials, Design and Manufacturing, MED, HBTI Kanpur, March 27-28, 2015 pp. 326-334
17Namit Singh Bhadauria, Gaurav Bartarya, Machining of Hardened Steel using Minimum Quantity Lubrication to improve Tool life", National conference on Advances in Materials, Design and Manufacturing, Allenhouse Institute of Technology Kanpur, January 30-31, 2016, pp 137-144.
18Gaurav Kumar, Gaurav Bartarya, “Single Point Incremental Forming: A Review”, Proceedings of National Conference on Innovations in Materials, Design and Manufacturing, MED, HBTI Kanpur, March 27-28, 2015 pp.235-343
 

Academic Honors & Awards

  • Recipient of Teaching fellowship under Early Faculty Induction Programme of AICTE New Delhi in year 2000
  • Institute Merit Scholarship recipient during 1997-2000 during B.Tech.
 

Research Scholar

1. Pranesh Datta:
                 Broad area: Utrasonic Assisted Machining of hard materials
2. Jyotiranjan Barik (Co Supervisor: Dr. Suvradip Mullick):
                 Broad area:Hybrid machining of Ceramic material
 

Professional Experience

1.     1. Assistant Professor at School of Mechanical Science, IIT Bhubaneswar, July 28, 2017 till date 2.     2. Assistant Professor at HBTI Kanpur (Now HBTU), Feb 15, 2007 to July 27, 2017 3.     3. Assistant Professor at Thapar Institute of Engg. and Technology, Patiala,  April 10, 2002 to Feb 14, 2007

Professional Experience

  • Asst. Professor, School of Mechanical Sciences, IIT Bhubaneswar, Odisha; July 28, 2017 till date
  • Asst. Professor,  Department of Mechanical Engineering, HBTU Kanpur (U.P.); Feb 15, 2007 to July 27, 2017.
  • Asst. Professor,  Department of Mechanical Engineering, Thapar Institute of Engg., and Tech, (now Thapar University) Patiala, Punjab; April 10, 2002 to Feb. 14, 2007.

Responsibilities taken

Current resonsibilities
  • Professor in Charge, E-Cell: Sep 17, 2018 till date  
  • PG coordinator, Sep. 1, 2020 till date
  • Faculty Advisor for 2019 MTech (ME) Batch, August 2020 till date
  • Faculty Advisor for B.Tech. and Dual degree students 2019 ME Batch  July 2019 till date
  • Member, School Academic Committee, Feb. 2020 till date
  • Professor in Charge, Metrology lab, Sep.1, 2020 till date
  • Co-Professor in Charge, Machine tool and Manufacturing lab, July 2019 till date
  • Secretarial assistance for Screening Committee for faculty application, Dec. 2018 till date
Previous responsibilities
  •  Coordinator Industrial Training July 2019 to Aug. 31, 2020
  • Co-Professor in Charge, Metrology lab, July2019 to Aug. 31, 2020
  • Member PhD application screening committee May-June 2020
  • Coordinator M.Tech. admission process for MSD 2019 batch
  • Coordinator JTS selection examination in June 2019 from SMS
  • Co- supervision for Battle tank restoration work with Prof. M.M.Mohapatra
  • PIC, Metrology lab, August 2018 to July 2019
  • Member, Backdrop design and decoration committee for various convocations since year 2018